Hinge Stand Kit | Door Stand for Painting | 8 Doors - Hinge Stand

Hinge Stand Kit | Door Stand for Painting | 8 Doors

$24.99

The Hinge Stand Kit is a reusable painting tool used to hold interior doors upright and rigid in preparation for spray painting.

QUICK & EASY SYSTEM
HingeStand uses the existing hinge and pin from your doors to lock them together upright and rigid. Keeping hinges attached to doors guarantees door will fit the way it did when it was hung.

BEST VALUE FOR MONEY
Our Hinge Stand kit holds up to 8 doors and contains 4 Hinge Stands & 16 floor spacers. For tall & heavy doors, use 2 hinge stands per pair.

TIME SAVER
Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once! Single person & fast setup.

PREVENT BOWING & WARPING
Hinge Stand keeps your doors upright and straight. Leaning or Laying doors flat increases the risk of bowing and warping.

PROTECT DOORS FROM DAMAGE
Our floor spacers protect the bottom edge of the doors by creating a gap between the floor and door- preventing dry fall, paint dust or dirt from sticking to surface of doors and giving you a higher qualify smoother finish.

Do they work with any type of door?

Hinge Stands universal design has been thoroughly tested and works with all 3.5" hinges.

Will it support a solid core door?

Yes. However, it is recommended two brackets per pair of doors. We recommend placing one high (on the top hinge) and another down low (on the middle or bottom hinge) for added strength and stability.

Does the Hinge Stand block the spray?

No. Our Product was designed and tested to allow full paint coverage and avoid this issue.

Do they work with different height doors?

Yes! The solution to connecting Hinge Stands to doors of varying heights is simply to set them up upside down. The door hinges will be at the same height when the doors are upside down.

How do these save time?

Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once!

Do I need any other tool besides Hinge Stand to prep the doors?

No! Say bye to the days of searching for hardware, fasteners, stools, tools or scraps of wood! All you need is the Hinge Stand Kit and you are ready to spray paint your doors.

You may also like

Hinge Stand Kit | Door Stand for Painting | 8 Doors

Hinge Stand Kit | Door Stand for Painting | 8 Doors

$24.99

The Hinge Stand Kit is a reusable painting tool used to hold interior doors upright and rigid in preparation for spray painting.

QUICK & EASY SYSTEM
HingeStand uses the existing hinge and pin from your doors to lock them together upright and rigid. Keeping hinges attached to doors guarantees door will fit the way it did when it was hung.

BEST VALUE FOR MONEY
Our Hinge Stand kit holds up to 8 doors and contains 4 Hinge Stands & 16 floor spacers. For tall & heavy doors, use 2 hinge stands per pair.

TIME SAVER
Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once! Single person & fast setup.

PREVENT BOWING & WARPING
Hinge Stand keeps your doors upright and straight. Leaning or Laying doors flat increases the risk of bowing and warping.

PROTECT DOORS FROM DAMAGE
Our floor spacers protect the bottom edge of the doors by creating a gap between the floor and door- preventing dry fall, paint dust or dirt from sticking to surface of doors and giving you a higher qualify smoother finish.

Do they work with any type of door?

Hinge Stands universal design has been thoroughly tested and works with all 3.5" hinges.

Will it support a solid core door?

Yes. However, it is recommended two brackets per pair of doors. We recommend placing one high (on the top hinge) and another down low (on the middle or bottom hinge) for added strength and stability.

Does the Hinge Stand block the spray?

No. Our Product was designed and tested to allow full paint coverage and avoid this issue.

Do they work with different height doors?

Yes! The solution to connecting Hinge Stands to doors of varying heights is simply to set them up upside down. The door hinges will be at the same height when the doors are upside down.

How do these save time?

Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once!

Do I need any other tool besides Hinge Stand to prep the doors?

No! Say bye to the days of searching for hardware, fasteners, stools, tools or scraps of wood! All you need is the Hinge Stand Kit and you are ready to spray paint your doors.

Contractor Pack | Reusable Door Stand for Spraying Doors | 24 Doors

Contractor Pack | Reusable Door Stand for Spraying Doors | 24 Doors

$75.00 $64.90

In response to requests made by Professional Painters and contractors, we created the Hinge Stand Contractor Pack - a value pack containing 3x more units than the original kit.

The size of our Contractor Pack is based on a typical home size, which on average, has 18 to 24 interior doors.

QUICK & EASY SYSTEM
HingeStand uses the existing hinge and pins from your doors to lock them together upright and rigid. Keeping hinges attached to doors guarantees door will fit the way it did when it was hung.

BEST VALUE FOR MONEY
Our Contractor Pack holds up to 24 doors and contains 12 Hinge Stands & 48 floor spacers. For tall & heavy doors, use 2 hinge stands per pair.

TIME SAVER
Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once! Single person & fast setup.

PREVENT BOWING & WARPING
Hinge Stand keeps your doors upright and straight. Leaning or Laying doors flat increases the risk of bowing and warping.

PROTECT DOORS FROM DAMAGE
Our floor spacers protect the bottom edge of the doors by creating a gap between the floor and door- preventing dry fall, paint dust or dirt from sticking to the surface of doors and giving you a higher qualify smoother finish.

Do they work with any type of door?

Hinge Stands universal design has been thoroughly tested and works with all 3.5" hinges.

Will it support a solid core door?

Yes. However, it is recommended two brackets per pair of doors. We recommend placing one high (on the top hinge) and another down low (on the middle or bottom hinge) for added strength and stability.

Does the Hinge Stand block the spray?

No. Our Product was designed and tested to allow full paint coverage and avoid this issue.

Do they work with different height doors?

Yes! The solution to connecting Hinge Stands to doors of varying heights is simply to set them up upside down. The door hinges will be at the same height when the doors are upside down.

How do these save time?

Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once!

Do I need any other tool besides Hinge Stand to prep the doors?

No! Say bye to the days of searching for hardware, fasteners, stools, tools or scraps of wood! All you need is the Hinge Stand Kit and you are ready to spray paint your doors.

Floor Spacers | Door Protection | 24 PK

$9.99

Floor spacers create a gap between doors and floor, eliminating the time consuming and tedious task of repositioning stir sticks.

The spacers are inserted into the bottom of door corners. This offers damage protection, while doors are being handled.

Use of our spacers also guarantees a better finish. A crisp, straight bottom edge can only be achieved when doors are elevated without protruding contact points.

Do they work with any type of door?

Hinge Stands universal design has been thoroughly tested and works with all 3.5" hinges.

Will it support a solid core door?

Yes. However, it is recommended two brackets per pair of doors. We recommend placing one high (on the top hinge) and another down low (on the middle or bottom hinge) for added strength and stability.

Does the Hinge Stand block the spray?

No. Our Product was designed and tested to allow full paint coverage and avoid this issue.

Do they work with different height doors?

Yes! The solution to connecting Hinge Stands to doors of varying heights is simply to set them up upside down. The door hinges will be at the same height when the doors are upside down.

How do these save time?

Increase productivity by eliminating time spent moving, rotating, or flipping wet doors. Just set up your doors and get all sides sprayed at once!

Do I need any other tool besides Hinge Stand to prep the doors?

No! Say bye to the days of searching for hardware, fasteners, stools, tools or scraps of wood! All you need is the Hinge Stand Kit and you are ready to spray paint your doors.